background image

 
 

Appendix A: Manufacturer’s Standard Warranty 

(I

F THE INVOICE SHOWS THAT YOU HAVE PURCHASED THE 

E

XTENDED 

P

ARTS 

W

ARRANTY OR IF YOU ARE INTERESTED 

IN PURCHASING THE 

E

XTENDED 

P

ARTS 

W

ARRANTY

,

 SEE THE 

M

ANUFACTURER

E

XTENDED 

P

ARTS 

W

ARRANTY

All La Marche Manufacturing Co. equipment has been thoroughly tested and found to be in proper operating 
condition upon shipment from the factory and is warranted to be free from any defect in workmanship and 
material that may develop within one year from date of purchase.  In addition to the standard one (1) year 
warranty, La Marche warrants its magnetics on a parts replacement basis only for nine (9) more years under 
normal use. 

Any part or parts of the equipment (except protective devices, DC connectors and other wear-related items) 
that prove defective within a one (1) year period shall be replaced without charge providing such defect, in our 
opinion, is due to faulty material or workmanship and not caused by tampering, abuse, misapplication or 
improper installation.  Magnetics are warranted for ten (10) years after date of purchase.  During the last nine 
(9) years of this ten (10) year warranty period, the warranty covers parts replacement only, no labor or other 
services are provided by La Marche, nor is La Marche obligated to reimburse the owner or any other person for 
work performed.  

Should a piece of equipment require major component replacement or repair during warranty period, these can 
be handled in one of three ways: 

1.

 

If the Purchaser elects to take the responsibility of repairing the equipment and requests replacement part(s), Purchaser 
or  Sales  Representative  must  contact  Factory  for  return  authorization  and  a  purchase  order  must  be  issued. 
Replacement part(s) will be promptly shipped and invoiced. After the defective part(s) are returned and inspected at the 
Factory, if the defect(s) were due to faulty material or workmanship, credit will be issued. 

2.

 

The  equipment  can  be  returned  to  the  La  Marche  factory  to  have  the  inspections,  parts  replacements  and  testing 
performed  by  factory  personnel.    Should  it  be  necessary  to  return  a  piece  of  equipment  or  parts  to  the  factory,  the 
customer  or  sales  representative  must  obtain  authorization  from  the  factory.    If  upon  inspection  at  the  factory,  the 
defect was due to faulty material or workmanship, all repairs will be made at no cost to the customer during the first 
year.  If  the  Extended  Warranty  is  purchased,  the  parts  required  for  repair  will  also  be  at  no  cost  but  La  Marche  will 
notify  the  Purchaser  of  the  costs  of  Labor  to  replace  the  defective  part(s).  A  Purchase  Order  to  cover  this  labor  is 
required before repairs will be initiated.  Transportation charges or duties shall be borne by Purchaser. 

3.

 

If the purchaser elects not to return the equipment to the factory and wishes a factory service representative to make 
adjustments and/or repairs at the equipment location, La Marche's field service labor rates will apply.  A purchase order 
to cover the labor and transportation cost is required prior to the deployment of the service representative. 

In accepting delivery of the equipment, the purchaser assumes full responsibility for proper installation, 
installation adjustments and service arrangements.  Should minor adjustments be required, the local La Marche 
sales representative should be contacted to provide this service only. 

All sales are final.  Only standard La Marche chargers will be considered for return.  A 25% restocking fee is 
charged when return is factory authorized.  Special chargers are not returnable. 

In no event shall La Marche Manufacturing Co. have any liability for consequential damages, or loss, damage or 
expense directly or indirectly arising from the use of the products, or any inability to use them either separately 
or in combination with other equipment or materials, or from any other cause.  In addition, any alterations of 
equipment made by anyone other than La Marche Manufacturing Co. renders this warranty null and void. 
Failure to follow safety precautions specified by the manufacturer during replacement of components or 
verifications renders this warranty null and void. 

La Marche Manufacturing Co. reserves the right to make revisions in current production of equipment, and 
assumes no obligation to incorporate these revisions in earlier models. 

The failure of La Marche Manufacturing Co. to object to provisions contained in customers' purchase orders or 
other communications shall not be deemed a waiver of the terms or conditions hereof, nor acceptance of such 
provisions.

 

THE ABOVE WARRANTY IS EXCLUSIVE, SUPERSEDES AND IS IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS.  NO PERSON, AGENT OR DEALER IS AUTHORIZED TO GIVE ANY 
WARRANTIES ON BEHALF OF THE MANUFACTURER, OR TO ASSUME FOR THE MANUFACTURER 
ANY OTHER LIABILITY IN CONNECTION WITH ANY OF ITS PRODUCTS UNLESS MADE IN WRITING 
AND SIGNED BY AN OFFICIAL OF THE MANUFACTURER. 

Summary of Contents for ITSM














Reviews: