LAM Technologies DS10 Series User Manual Download Page 2

Page: 2 / 72

The information in this document replace any other material previously published.

LAM Technologies reserves the right to change technical specification and price to any products herein at
any time and without further notice.

This manual contains reserved and proprietary information and may not be copied, disclosed or used for any
purposes not expressly authorized by LAM Technologies.

LAM Technologies warrants the products herein against defects in materials and workmanship for a period
of 12 months. This warranty does not apply to defects resulting from an improper use, inadequate installation
or maintenance. This warranty also does not apply in case the products are received modified or integrated
with other parts and/or products not expressly authorized or provided for by LAM Technologies.
Any assistance request must be addressed to the product’s purchase source. In case of direct purchase
from LAM Technologies a returned material authorization number (RMA) must be obtained from

[email protected]

clearly specifying the product code, the serial number, the problem found

and the assistance required. The RMA will have to be clearly stated on each shipping documents otherwise
the parcel could be rejected.
The customer shall be responsible for packaging and for shipping of the defective product to LAM
Technologies which must be sent charges prepaid. The product inspected, repaired or substituted will be
available to be collected at LAM Technologies’.
During and within the warranty period, LAM Technologies can, on its judgment, repair or substitute the
product. The cost of material and labor will not be charged within the warranty period.
The above warranty also does not apply to the software. LAM Technologies shall not be liable for any direct
or indirect damages such as, but not limited to, costs of removal and installation, lost profits, coming from
the use or the impossibility to use the software.

This manual is intended for expertise technical staff. In case the arguments, the terms and the concepts
should not be clear you can contact

[email protected]

. It is forbidden to use the products herein

described without being sure to have understood features, installation and use procedures.

While products described have been designed with extreme care, they are not intended or authorized for use
as components in applications intended to support or sustain life and in application in which failure of the
product could create a situation where injury or death may occur to people or animals.
LAM Technologies shall not be liable for any direct or indirect damages coming from the use of its products.

The information in this manual have been carefully checked and are believed to be accurate, however any
suggestion to improve it will be highly appreciated.

LAM Technologies is a registered trade-mark.

Contacts:

•

General information:

[email protected]

•

Technical support:

[email protected]

•

Commercial information:

[email protected]