LAKOS Waterworks PWC Series Separators
10
Trouble-shooting Guidelines for Separator
Installations
continued…
9. Air Relief Ports: The appropriate air relief ports should be used at start-up to expel air from
the separator.
If the separator will be drained periodically or exposed to entrained air or gases from the
piping system, air vents should be permanently installed.
10. Down Stream Filtration: The use of finer filtration (polishing) downstream from the separator
is a common application. Be aware, however, that the barrier filter (as it accumulates more
solids) causes an increasing pressure loss, which may cause the flow rate of the system to be
reduced - sometimes below the recommended flow rate of the separator. This situation will
often reveal itself when typically separable solids begin to show up regularly on the
downstream barrier filter (leading to the assumption that the separator is not operating as
expected). Always check for variations in the flow rate when downstream conditions change.
Notes
Separator Model:
Sales Order #:
Purchase Date:
Distributor:
System Flow:
Separator Delta P:
1365 N. Clovis Avenue
Fresno, California 93727
(559) 255-1601
●
http://pwc.lakos.com
Inlet-to-Outlet Differential: