background image

Page 

3

ALTO Access Products | 

Lakeside Industries Ltd

Inspection Care & Maintenance

Alto Access equipment is designed and manufactured to the highest standards in the industry and is stronger, 
more robust and safer than any comparable competitor product. Properly cared for, it will give a long and 
productive service life.

All Alto equipment should be subjected to the care and maintenance regime specified in the assembly guide 
supplied with your Room Scaffold.

Never use any equipment which is damaged, has parts missing or is improperly assembled.

Safety

 ·

A risk assessment and method statement must be prepared sufficient to ensure the safe assembly, 
use and dismantling of a Room Scaffold and the elimination or minimisation of all consequent risks.

 ·

Check  that  all  of  the  necessary  components  and  equipment  for  the  particular  Room  Scaffold 
configuration  to  be  built  are  on  site,  undamaged  &  functioning  correctly.  Damaged/incorrect 
components must not be used.

 ·

Check that the surface on which the Room Scaffold is to be located is capable of supporting the Room 
Scaffold and its payload.

 ·

Room Scaffolds must always be climbed from the inside.

 ·

Do not ride on or attempt to move a loaded Room Scaffold.

 ·

Never remove components from a Room Scaffold whilst it is in use.

 ·

Do not lean ladders, steps or other objects against the Room Scaffold.

 ·

The Room Scaffold many not be used as a means of access to another place. 

 ·

Do not overreach.

 ·

Always wear appropriate personal protective equipment and work-wear including foot wear with a 
flat firm sole and a good grip.

 ·

The Room Scaffold is only to be used on level ground. Do not adjust the height using adjustable legs.

 ·

Always take safety measures when working close to doorways, openings and other traffic paths, to 
prevent accidental collisions. Never block emergency exits, fire-paths or other escape routes.

 ·

Always  comply  with  the  Work  at  Height  Regulations  2005  when  erecting,  dismantling  &  using  the 
Room Scaffold.

 ·

Never use this ALTO Room Scaffold until you are sure you are competent in its use and physically able 
to safely enter, exit and work from the platform.

 ·

Never use the ALTO Room Scaffold if you are feeling unwell or you have taken any alcohol, medication 

Summary of Contents for Alto Room Scaffold













Reviews: