Lakeland 61792 Instruction Booklet Download Page 5

5

•  Always ensure that your hands are dry before removing the plug from the mains socket.  

Never pull the plug out of the mains socket by its lead.

•  To avoid injury or possible fire, do not cover the appliance when in use.

•  Do not connect this appliance to an external timer or remote control system.

•  An extension cable may be used with care. The electrical rating of the cable should be 

at least as great as the appliance. Do not allow the cable to hang over the edge of the 
worktop or touch any hot surfaces.

• This appliance complies with the basic requirements of Directives 04/108/EC 

(Electromagnetic Compatibility) and 06/95/EC (Safety of Domestic Electrical Appliances).

• 

WARNING:

 A cut off plug inserted into a 13 amp socket is a serious safety (shock)  

hazard. Ensure the cut off plug is disposed of safely.

•  

 

CAUTION: 

The plastic bags used to wrap this appliance or the packaging may  

  be dangerous. To avoid risk of suffocation, keep these bags out of reach of  
  babies and children. These bags are not toys.

• Do not place the appliance on or near a gas or electric oven, or any hot surfaces.

• 

DO NOT

 leave the carving knife unattended. 

• 

DO NOT operate with wet hands. 

• 

CAUTION:

 The blades are very sharp. Care must be taken when handling the blades  

  and during cleaning.

• 

WARNING:

 To prevent injury, keep your hand, fingers, hair, clothing and utensils well  

  away from the carving knife during use. 

• The carving knife has a safety power ON button and will stop working if you do not  
  have your finger on the safety power ON button.

• Always turn off and unplug the carving knife from the socket and remove the blades  
  when it is left unattended and before assembling, taking apart or cleaning.

• Only operate the carving knife when cutting food.

• Do not use the carving knife to cut very hard food products, such as bones, shelled nuts,  
  frozen meats etc. This will damage the blades and motor.

• Use the carving knife in short bursts and 

DO NOT

 use continuously for more than  

  2 minutes at a time, allow the motor to cool down between cycles for 1 minute.    
  After operating for 5 cycles continuously, the appliance will need to cool down to room  
  temperature to start.

Summary of Contents for 61792













Reviews: