Quick Start Guide
SDC-WB40NBT
Americas: +1-800-492-2320 Option 3
Europe: +44-1628-858-940
Hong Kong: +852-2268-6567 x026
www.lairdtech.com/wireless
5
SDC-WB40NBT_QSG_v1_0_201211
Figures 1 and 2: Antenna Cable Connections
1.
Plug the SDC-WB40NBT module into ST19, the 120-pin high-density connector situated near the four mounting
screws that were installed in step 1.
2.
Connect an antenna with an SMA connector to the antenna port STA4.
3.
Connect the USB-to-RS232 adapter to the position labeled
ST3 DBU
(RS232) on the Hoeft & Wessel breakout
board.
Note: Do not plug the USB-to-RS232 cable into a host PC at this time. Its driver
must first
be installed onto the host PC.
Software Installation and Configuration
for information on how to install the driver.
Figure 3: RS232 Connection
