background image

800-898-0759 • 845-339-9555 • 2000 Sterling Road • Mount Marion, NY 12456 • www.lairdtelemedia.com

- Page 1 -

LTM-WAVE-RC

Wireless 8-Channel Receiver

For use with LTM-WAVE-AG

Transmitter

The 

LAIRD WAVE-RC

is a powerful and efficient means of remote monitoring your LTM-WAVE-AG trans-

mitter. The system may be used to receive standard NTSC composite video signal and can receive a

clean UHF signal up to 250 feet line-of-site and approximately 75 feet indoors between walls. The

WAVE-RC can demodulate UHF signals transmitted by the LTM-WAVE-AG and convert to standard base-

band composite video / line-level audio for use with compatible display or recording equipment.

Some notes on wireless transmissions:

This system uses standard UHF low power transmissions / reception of TV signals for use in monitoring

and viewing only. Low power UHF transmissions are subject to other environmental signal ingress and

it must be noted that it is possible that other transmissions of equal or more signal strength may cause

interference on the channel that is in use by the WAVE-RC.

The WAVE-RC works best in LINE-OF-SIGHT applications, where the transmitter is in sight line to the

transmitter. Indoor use of the WAVE-RC will be reduced by such environmental conditions as metal sur-

faces, walls, and steel structures. You may see occasional flickers as the receiver is in motion. This is

caused by reflections from surfaces in the environment. The best results for indoor work is where the

receiver somewhat stationary.

The WAVE-RC is designed for remote signal monitoring only. The signal is received and decoded to a

composite video / line level audio signal. These signals can be fed to any compatible monitor, projector

or recorder. This signal can be recorded, however, any reflections or UHF interference may cause a poor

signal quality to be recorded.

The WAVE-RC reception  is accomplished over a standard UHF TV carrier. As such, these signals can be

monitored and/or recorded by anyone within range of such transmission. Please be aware that your

work is not protected and may be received by others not under your control or employ.

Please be aware that the Federal Government and the FCC has specific laws that regulate low power

transmission / reception and video surveillance using wireless technology. This product should not be

used for any activity that is defined as a violation of any of such laws or the invasion of personal pri-

vacy of individuals. Please research and follow the local and Federal laws that regulate such technolo-

gy and its use.

D

ESCRIPTION

Summary of Contents for LTM-WAVE-RC









Reviews: