Laird DVK-WLM400, Manual

Page: 32 / 43

WISM+ DVK MANUAL
Version 1.00 Page 27
©
Laird Technology 2010
8 Using the Performance Tool in Infrastructure Mode
The TX Performance tool in WIF.exe is used to send packets to a UDP socket at a destination IP address.
In the example shown below, the WISM+ (in infrastructure mode NOT bridged) is wirelessly connected to the Access
Point which has an Ethernet connection to the Remote PC. The Remote PC is running dboard.exe.
See the following page on how to set up the WISM+ configuration.
There are too many combinations of the above diagram to discuss. The Access Point could be a Router, the Remote
PC might not be connected directly to the Access Point or Router, but over a network. The PCs could have Static IP
addresses, etc.
Refer to section: “
Using the Performance Tool in Ad-Hoc Mode
” for a description of using WIF.exe to
transmit packets on the WISM+ Host PC and dboard.exe operation on the Remote PC.
Remote PC
WISM+
Dev Kit
USB
WISM+ Host PC
Infrastructure Mode
SSID “TEST”
DHCP- No Secutiry
Com Port
(Optional)
“dboard.exe”
Firewall & Virus Disabled
WIF.exe
“TX Performance test”
Access
Point
Ethernet
802.11b/g
Wireless
connection
SSID “TEST”
No security