Laird DVK-BL600-SA User Manual Download | Manualshive

Page: 15 / 21

background image

BL600 Development Kit

Version 2.0

Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth

15

CONN-GUIDE_BL600_DVK_v2_0

5.2.1

Buzzer

The buzzer (U2) ACTC SMD PIEZO BUZZER part number APD-1203-PQ1 can be disconnected from BL600 module by
micro-DIP switch CON15. Physical micro-DIP switch body has text “ON” on the closed side.

To drive the buzzer, configure SIO_15 as a digital output using

smart

BASIC GpioSetFunc(15,2,0) and then, for

example, write a 0 followed by a 1 to SIO_15 repeatedly in a loop.

Sample

smart

BASIC applications are available from a Laird FAE, or refer to “bzt.buzzer.test.sb” in the

smart

BASIC

sample application library on BL600 product pages at:

http://lairdtech.com/Products/Embedded-Wireless-Solutions/Bluetooth-Radio-Modules/BL600-Series/

5.2.2

Temperature Sensor

The temperature sensor (U1) can be disconnected from BL600 module by micro-DIP switch CON14. Physical
micro-DIP switch body has text “ON” on the closed side.

The temperature sensor (U1) can be disconnected from supply rail by cutting the solder bridge SB1.

The development board on-board temperature sensor (TI LM20BIM7

www.ti.com/lit/ds/symlink/lm20.pdf)

has an

Analogue output that is connected to BL600 module pin SIO_04; but since the LM20BIM7 has an analogue output,
the BL600 module SIO-04 digital pin (DIO) must be configured as AIN analogue input (ADC). To configure the
SIO_4 pin from DIO pin to Alternate function AIN, see file “ts.temperature.sensor.sb” in the

smart

BASIC sample

application library on BL600 product pages at:

http://lairdtech.com/Products/Embedded-Wireless-Solutions/Bluetooth-Radio-Modules/BL600-Series/

Figure 8: Temperature Sensor

Figure 7: Buzzer

«
...
13
14
15
16
17
...
»

Summary of Contents for DVK-BL600-SA






















Reviews:

No comments

Related manuals for DVK-BL600-SA

Brand: FALCOM Pages: 62

Brand: Ebyte Pages: 10

Brand: Ebyte Pages: 16

Brand: Ebyte Pages: 24

Brand: Ebyte Pages: 22

Brand: Ebyte Pages: 28

Brand: Ebyte Pages: 17

Brand: Zte Pages: 82

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands