Laird BTM410, Hardware Integration Manual

Page: 6 / 26

BTM410/411
Bluetooth
®
AT Data Module Hardware Integration Guide
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
6 CONN-HIG-BTM410-411
Categories Feature Implementation
Protocols And Firmware Bluetooth Stack Version 2.1 compliant. Fully integrated.
Profiles GAP (Generic Access Profile)
SDP (Service Discovery Profile)
SPP (Serial Port Profile)
Firmware Upgrade Available over UART
Connection Modes Point to point (cable replacement)
Command Interface AT Instructions set Comprehensive control of connection and
module operation S Registers for non-volatile
storage of parameters
Current Consumption Data Transfer Typically 32 mA
Note: For an Absolute Current Ratings
summary, see Table 2-6 .
Low Power Sniff Mode Less than 2.5mA
Supply Voltage Supply 3.0 V – 3.3 V DC
I/O 1.7 V – 3.3 V DC (independent of Supply)
USB & UART 1.7 V – 3.6 V DC (independent of Supply)
Coexistence/
Compatibility WLAN (802.11) 2-wire and 3-wire hardware coexistence
schemes supported
Connections Interface Surface Mount Pads
External Antenna (BTM410) Pad for 50 Ohm antenna
Physical Dimensions 12.5 mm x 18.0 mm x 3.4 mm BTM410
12.5 mm x 22.0 mm x 3.4 mm BTM411
Weight 3 grams
Environmental Operating Temperature -40° C to +85° C
Storage Temperature -40° C to +85° C
Approvals Bluetooth Qualified as an Bluetooth End product
FCC Limited Modular Approval (BTM410)
Full Modular Approval (BTM411)
CE & R&TTE Meets CE and R&TTE requirements
Miscellaneous Lead free Lead-free and RoHS compliant
Warranty 12 Months
Development Tools Development Kit Development board and software tools
DVK-BTM410 Dev Kit with BTM410 module
DVK-BTM411 Dev Kit with BTM411 module