Laird BT800 series, Hardware Integration Manual

Page: 34 / 40

BT800 Hardware Integration Guide
Version 0.2
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
34 CONN-GUIDE-BT800_v0_2
15 FCC
AND
IC R
EGULATORY
Model US/FCC CANADA/IC
BT800 SQGBT800 3147A-BT800
BT810 SQGBT800 3147A-BT800
BT820 SQGBT800 3147A-BT800
BT800-ST SQGBT800 3147A-BT800
The BT800 family has been designed to operate with the antenna listed below having a maximum gain
of 0.5 dBi. The required antenna impedance is 50 ohms.
Item Part Number Mfg. Type Gain (dBi)
1 AT3216-B2R7HAA ACX Ceramic 0.5
Documentation Requirements 15.1
In order to ensure regulatory compliance, when integrating the BT800 into a host device, it is necessary
to meet the documentation requirements set forth by the applicable regulatory agencies. The following
sections (FCC, Industry Canada, and European Union) outline the information that may be included in
the user’s guide and external labels for the host devices into which the BT800 is integrated.
FCC
Note : You must place “Contains FCC ID: SQGBT800” on the host product in such a location that it
can be seen by an operator at the time of purchase.
User’s Guide Requirements
The BT800 complies with FCC Part 15 Rules for a Modular Approval. To leverage Laird’s grant, the
conditions below must be met for the host device into which the BT800 is integrated:
The antenna is installed with 20 cm maintained between the antenna and users. 1.
The transmitter module is not co-located with any other transmitter or antenna that is capable 2.
of simultaneous operation.
As long as the conditions above are met, further transmitter testing is typically not required. However,
the OEM integrator is still responsible for testing its end-product for any additional compliance
requirements required with this module installed, such as (but not limited to) digital device emissions
and PC peripheral requirements.
IMPORTANT!
In the event that the three conditions above cannot be met (for example certain device
configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
When using Laird’s FCC grant for the BT800, the integrator must include specific information
in the user’s guide for the device into which the BT800 is integrated. The integrator must not