www.lairdtech.com/bluetooth
37
© Copyright 2018 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Figure 23: Inserting the coin cell (step 2)
To remove the coin cell, follow these steps:
1.
Hold down the coin cell holder (J34) at the corners.
2.
Use a screwdriver in the position shown in picture below, to gently remove the coin cell from the coin cell holder (J34).
This is the correct method to remove coin-cell from holder (J34).
Note:
Due to tight fit of coin cell in the coin-cell holder (J34), care should be taken prevent damage to the J34
land pads.
Figure 24: Removing the coin cell (step 2)
Summary of Contents for BL654
Page 1: ...Version 1 1 ...
