Laipac S911 Lola Operation Manual Download

Page: 4 / 64

Laipac Technology Inc.

20 Mural Street, Unit 5, Richmond Hill Ontario L4B 1K3 Canada

Tel: 905-762-1228 | Fax: 905-763-1737 | E-mail:

[email protected]

http://www.laipac.com

Knowing about your S911 LOLA

The drawing below shows the locations and names of the physical features with this
product

Power Button: It is being used for turning on or off the S911 LOLA unit.

Turn On the unit:

Press this button over 3 seconds, user should feel the vibration and

observe flashing generated by the GPS indicator LED, GSM indicator

LED and SOS button backlight LED

Turn Off the unit:

Press this button over 3 seconds

, GPS and GSM status indicator

LEDs will be turned off, also, he can feel the vibration generated

by the vibrator. After that, unit will enter into its Power-Down

Mode.

Summary of Contents for S911 Lola

































































Search results

Summary of Contents for S911 Lola

Reviews:

Related manuals for S911 Lola

Brands by name

Popular brands

Laipac S911 Lola, Operation Manual

Search results

Summary of Contents for S911 Lola

Reviews:

Related manuals for S911 Lola

Brands by name

Popular brands