13
2021 LAING All right
Preparation
Install the docking bracket
The docking bracket is used to place and support the sled and arm.
The installation steps are as follows
：
1.
Open the bracket and place it on the ground, then put the docking bracket on the
bracket pin, and tighten the locking screw, install the M6*60mm screw on the docking
bracket.
2.
Take out the sled and place it on the docking bracket pallet, and hang the arm on the
M6 screw
。
©
Install battery and monitor
The installed battery and monitor are optional accessories (you need to purchase them),
please confirm whether these items are included in your configuration.
1. Align the V-shaped plug on the bottom of the battery with the V-shaped slot on the gusset,
and then push it in with a little force.
2. Align the screw hole at the bottom of the monitor with the monitor interface screw at the bottom
of sled, then tighten it to fix it.
.
