9
2021 LAING All right
Gimbal
1. Bearing fixing ring (inner and outer ring
easy to maintain and dustproof)
2. Gimbal bracket
3. Gimbal handle
4. Gimbal armrest
5. Clamping rod
6. Clamping force adjustment screw
To modify the position of the gimbal on
the center rod, the clamping lever must
be opened.
Only when the sled is docked on the stand
or in a horizontal position,can the clamping
lever be opened.
If the lower rod slides up or down, please
loosen the upper and lower rod pipe clamps first
The
clamping force must be appropriate, in case that when
the clamping rod is closed, the clamping force is too
large to make the lower rod slide not smoothly or even
get stuck.
Bottom
1. Horizontal bubble (backlight, high precision)
2. Bracket clamping knob
3. Monitor bracket (rotatable and movable)
4. Monitor shaft (can be rotated 180 degrees)
5. Monitor shaft locking button
6. Monitor bracket lever lock button
7. Post clamp
8. Battery holder lever lock button
9. Battery holder shaft (can be rotated 180
degrees)
10. Battery holder shaft locking button
11.V type gusset seat
12. Monitor bracket rod
13. Battery holder rod
Notes
关
Notes
open
close
open
close
