background image

Some vehicles are provided with a garage area for small 
motorcycles, mopeds or bicycles. 
Such vehicles must be fastened with ties to the rings (a) 
located on the floor. 

The load inside the garage/rear storage space must be 
evenly distributed and must not exceed the maximum 
limit indicated on the label located inside the 
compartment. 
If you use this area for transport of bulky objects (such 
as tables, chairs, etc.), the objects must be secured so 
that they cannot move when driving. 
If you transport motorcycles, mopeds or similar, which 
are powered by flammable fuels, ensure that their tank 
is completely empty.

21 - GARAGE/REAR STORAGE SPACE

USER’S GUIDE

111

a

a

a

Before the start of any journey, please make sure 
that all the garage/rear storage space hatches are 
properly closed.

WARNING

On some models, the garage is smaller and cannot 
hold vehicles. In this case, it is a storage space for 
various materials.

NOTE

Do not use the garage/rear storage space as a 
sleeping or living space for people or pets. This 
space is not ventilated. Danger of asphyxiation due 
to lack of oxygen.

WARNING

When loading the garage/rear storage space, take 
care not to exceed the technically permissible 
maximum mass on each axle and the technically 
permissible maximum laden mass.

WARNING

When the garage/rear storage space is loaded to 
capacity, the front axle will be lighter due the lever 
effect. The behaviour of the vehicle on the road will 
worsen.

WARNING

Distribute the load evenly. Loads concentrated too 
much in one place can damage the floor covering.

WARNING

Summary of Contents for Ecovip H 2109































































































































Reviews:

Related manuals for Ecovip H 2109