Laica MikroPLASTIK-STOP Instructions And Guarantee Download Page 13

Page: 13 / 19

Instructions and guarantee

N.B. The filter may be difficult to remove: this is
normal because, due to safety issues, the filter
adheres to the hopper in order to prevent unwanted
leakages.

Wash all the components, except for the

Bi-flux

cartrige, the MikroPLASTIK-

STOP™ filter and

the removable manual indicator, by hand with warm
water and washing-up liquid at least 2-3 times a week.
Do not use other chemicals or abrasives.

Never wash

the MikroPLASTIK-

STOP™ filter with tap water.

Do not wash the Bi-flux

cartridge and the MikroPLASTIK-

STOP™ filter with soap or detergents.

REPLACEMENT OF DAMAGED PARTS

Replacement of the lid / removable manual indicator

/ MikroPLASTIK-

STOP™ Activation Pump:

In case of breaking or damage, contact your retailer.
Then dispose of the damaged parts as per the paragraph

"DISPOSAL PROCEDURE".

TROUBLE SHOOTING

DISPOSAL PROCEDURE

Dispose all the components according to their respective
belonging class.

WARRANTY

This equipment is covered by a 2-year warranty starting
from the purchase date, which has to be proven by
means

of the stamp or signature of the dealer and

by the fiscal payment receipt that shall be kept
enclosed to this document.

This warranty period complies with the laws in force and
applies only in case the consumer is an individual. Laica
products are designed for domestic use only; therefore,
their use for commercial purposes is forbidden. The
warranty covers only production defects and does not
apply, if the damage is caused by accidental events,
misuse, negligence or improper use of the product.
Use the supplied accessories only; the use of other
accessories invalidate the warranty cover.Do not open
the equipment for any reason whatsoever; the opening
or the tampering of the equipment, definitely invalidate
the warranty. Warranty does not apply to parts subject
to tear and wear along the use, as well as to batteries,
when they are included. Warranty decays after 2 years
from the purchase date. In this case, technical service
interventions will be carried out against payment.
Information on technical service interventions, under
warranty terms or against payment, may be requested
by writing at [email protected]. Repair or replacement
of products covered by the warranty terms are free of
charge. In case of faults, refer to the dealer; DO NOT
send anything directly to LAICA.

All interventions covered by warranty (including product
replacement or the replacement of any of its parts)
shall not be meant to extend the duration of the original
warranty period of the replaced product.

The manufacturer cannot be made liable for any
damages that may be caused, directly or indirectly, to
people, things and pets resulting from the inobservance
of the provisions contained in the suitable user manual,
especially with reference to the instructions related to
installation, use and maintenance of the equipment.
Being constantly involved in improving its own products,
Laica reserves the right to modify its product, totally or
partially, with reference to any production need, without
that this involves any responsibility whatsoever by Laica
or its dealers.

PROBLEM

POTENTIAL CAUSE

SOLUTION

The water
flow slows
down until
stopping

1) Bi-flux

cartridge

has not been
properly activated.

2) Air bubbles may

build up inside the
Bi-flux

cartridge

thus hindering the
normal water flow.

3) MikroPLASTIK-