LAI Games Stacker Operator'S Manual Download Page 25

Page: 25 / 62

Operator's Manual –

Stacker Vendor

LAI GAMES

Page 20

P08 = CUBE SPEED

(Default 3) (Adjustable 1 - 6)

This option is for setting the

Cube Speed.

This affects the speed of the cube block

movement as the player increases in levels. A setting of [1] is the easiest up to [6],
the hardest.

P09 = SKILL SETTING (Minor Prize)

(Default 1) (Adjustable 1 – 4)

This option sets the

Skill level

for players to reach the Minor Prize level, as listed

in the table below.

These settings are made easy on purpose, players must still be

skillful to get to this level, however very few players take the minor prize, most
play on to try and win the major prize.

MINOR PRIZE SKILL SETTINGS

1 = Approx. 1 Minor Prize in Every Game

3 = Approx. 1 Minor Prize in 3 Games

2 = Approx. 1 Minor Prize in 2 Games

4 = Approx. 1 Minor Prize in 4 Games

P10 = SKILL SETTING (Major Prize)

(Default 8) (Adjustable 1 – 10)

This option sets the

Skill level

for players to reach the Major Prize level, as listed

in the table below.

As this is a skill game the win rate is only the approximate rate

for each difficulty setting.

MAJOR PRIZE SKILL SETTINGS

1 = Easiest (

Approx. 1 Win in 20 Games)

6 = Medium to Hard (

Approx. 1 Win in 200 Games)

2 = Very Easy (

Approx. 1 Win in 30 Games)

7 = Hard (

Approx. 1 Win in 300 Games)

3 = Easy (

Approx. 1 Win in 40 Games)

8 = Very Hard (

Approx. 1 Win in 400 Games)

4 = Easy

to Medium (

Approx. 1 Win in 50 Games)

9 =Very, Very Hard (

Approx. 1 Win in 600 Games)

5 = Medium (

Approx. 1 Win in 100 Games)

10 = Hardest (

Approx. 1 Win in 800 Games)

P11 = MERCY SYSTEM MODE ADJUSTMENT

(Default 0) (Adjustable 0 – 2)

This option adjusts the way that mercy tickets or capsules paid out if the optional
ticket or capsule dispenser is fitted. See

P15

for setting the number of mercy

tickets or capsules that will be dispensed.

Mercy System disabled, no ticket or capsules will be paid. This setting
must be used if optional ticket or capsule dispenser is not fitted

Mercy tickets / capsules are paid if no Major or Minor prize is won.
Optional ticket / capsule dispenser must be fitted

Mercy tickets / capsules are paid on every game credit, regardless if
prizes are won or not. Optional ticket / capsule dispenser must be fitted

* NOTE! *

If no ticket or capsule dispenser is fitted to the machine,

make sure

P11

and

P12

adjustments are set to [0].

Summary of Contents for Stacker































































Search results

Summary of Contents for Stacker

Reviews:

Related manuals for Stacker

Brands by name

Popular brands

LAI Games Stacker, Operator'S Manual

Search results

Summary of Contents for Stacker

Reviews:

Related manuals for Stacker

Brands by name

Popular brands