Operator's Manual –
Dino Duel
©
LAI GAMES
Page 14
CARD SWIPE TEST SCREEN
CARD SWIPE TEST DETAILED
STATUS
(ERROR / OK / ILLEGAL ID)
This displays the card’s status when a card is swiped in the card reader. If it
displays ERROR, then the data on the card is error. If it displays OK, the data is
correct and the card’s name will be displayed in the Dino Card Name section. If
ILLEGAL ID is displayed, then the card swiped is not a Dino Duel card.
DINO CARD NAME
This displays the name of the cards. If the status of the card is OK, the name of the
card will be displayed here.
EXIT
Highlighting Exit and pressing the Test button will exit the Card Swipe Test
screen and go back to Test Mode main screen.
CARD DISPENSER TEST
ENTER
The Card Dispenser Test can be entered by highlighting
CARD
DISPENSER TEST
while in Test Mode main screen and pressing the
Test button. Or, by pressing the red Test button once while in Attract
mode, highlighting
CARD DISPENSER TEST
, and pressing the Test
button again.
SELECT
The Up and Down buttons are used to step through each of the Card
Dispenser Test options until the Test is exited.
ACTIVATE
The red Test button is pressed to activate the highlighted Card
Dispenser Test option.
CANCEL / BACK
The green Service button is pressed to go back to previous menu
screen without going through the
Exit
.
EXIT
The Card Dispenser Test is exited by highlighting the
Exit
and
pressing the Test button.
* NOTE! *
If you swipe more than one card and the Status displays
ERROR/OK/ILLEGAL ID for all the cards or nothing is displayed on
screen, there is a possibility that the card reader is not working properly.
Check and clean card reader path and head off obstructions.