laguna SPS-9, Owner'S Manual

Page: 16 / 39

16
DRUM STOP BUTTON: Press this button to stop DRUM (Sanding head).
The Sanding Head will stop when;
⚫
Any EMERGENCY STOP BUTTON is pressed.
⚫
Any limit switch inside the machine case is activated.
⚫
The sanding head door is not closed properly.
⚫
Power is disconnected.
EMERGENCY STOP BUTTONS: Press either (front or back) button to stop all functions
of this machine; turn clockwise to deactivate.
C-3 How to operate
1. Measure the workpiece thickness
2. Adjust the conveyor bed position to match the workpiece thickness.
3. There is a dial indicator near the bed. Use it for micro-adjustments. To operate;
loosen the black knob and move the rod until it touches the bottom of the dial
indicator stud and the scale reads “0”. When adjusting thinner the dial indicator will
show the movement of the sanding head.
4. Turn on the drum.
5. Turn on the conveyor. The speed is variable.
6. Turn on the vacuum source and put the workpiece on the conveyor. Confirm the
vacuum source is the correct size and type to safely collect dust and debris from the
material being sanded!
7. Adjust the conveyor position for successive passes.