laguna SPS-9, Owner'S Manual

Page: 13 / 39

13
B. INSTALLATION
B-1 Unpacking/installation
The machine was packed in a crate for shipment. Nails are sharp! Please use caution when
unpacking and removing the crate.
When using a forklift to lift the machine take care to prevent bumping, make sure the forklift
forks are in a stable position and extend through the bottom of machine, while maintaining
balance of the machine. Place the machine on a proper site that is flat, well lit and allows safe
access for operation and maintenance.
The Sanding machine you have purchased is designed to operate at a high performance level.
To reach this expectation it requires careful installation. The methods and care used to install this
machine will affect its sanding performance and ability to hold tolerances.
When the machine arrives, CHECK FOR SHIPPING DAMAGE. If there is damage, accurately
record the damage on the Bill of Lading before the transport company leaves your plant. This will
provide the insurance company with a clear record of the damage. Immediately make a claim for
damages against the transport company.
Have the proper equipment and personnel to assist you in removing the skid and placing the
machine. We recommend you have trained machine riggers to assist you in uncrating and placing
the machine.
Set the machine in place. Read and understand this operation and maintenance manual before
operating or doing any maintenance on this machine. Read and understand the Safety Summary.
You will need a set of open/closed end metric wrenches, a large adjustable wrench, and a
accurate bubble type level.
Read all of the tags and decals attached to the machine. They contain needed information for the
safe operation, proper placing, and setup of the machine.
* Locate the electrical attachment points, and dust collection outlets.
* Use caution when placing the machine. Allow space for opening the outboard door,
for loading abrasive belts, and material handling at the infeed and outfeed of the
machine.