18
Unpacking your machine.
To unpack your machine you will need tin snips, a knife, and a wrench.
1
. Using the tin snips, cut the banding that is securing the packing box (If fitted).
WARNING:
EXTREME CAUTION MUST BE USED, BECAUSE THE BANDING WILL SPRING AND
COULD CAUSE INJURY.
Lathe in packaging
Leg Parts of the lathe
Second leg
Top packaging removed
2.
Open the box and remove the parts sent with the lathe including the first leg.
Note.
The legs are heavy and caution must be exercised. They are cast iron and if dropped
they will break.
3.
Remove the top packaging and remove the second leg.
4.
Remove the lathe bed. It is recommended that it be lifted with a hoist or forklift using a
"sling". as it is very heavy.
Summary of Contents for Revo 1836
