laguna REVO 15, Owner'S Manual

Page: 25 / 43

Set Up
25
Step 1 - Install the Slide Brackets
Place two bolts (index 33, 5/16-18UNCx3") through each leg, with one washer
(index 34) for each bolt.
Install the four (index 31) slide brackets
to the four wheels.
Thread the bolts directly into the slide brackets.
Step 2 - Install the rear wheel bracket
Install the rear wheel bracket (index 30) the left or right of the lathe using four bolts (index 33, 5/16-18UNCx3"), with two
washers (index 34) and one nut (index 32) for each bolt.
It is up to user discretion which side the front and rear wheel assemblies are attached. Do what is best for your
shop.
Place the bracket (30) on the two slide mounts.
Drop in the four bolts with one washer before each bolt, and then another washer
before the nut, like this:
Tighten all hardware.