6
Noise Emission
Specification Sheet
Notes concerning noise emission:
Given that there exists a relationship between noise level and exposure times, it
is not precise enough to determine the need for supplementary precautions. The
factors affecting the true level of exposure to operators are clearly the amount of
time exposed; the characteristics of working environment; other sources of dust
and noise. etc. For example, adjacent machines may impact the level of ambient
noise. It is also possible that exposure level limits will vary from country to
country.
Motor
6 HP constant torque
Spindle
High frequency liquid-cooled spindle built
with NSK bearings rated for 100% duty
cycle
Spindle RPM
(6,000-24,000 rpm)
Rapid travel
900 in/min
Maximum cutting speed
600 in/min
Dust port diameter
4 inches
Volts
220volt single phase
Precision Helical Rack & Pinion
Drive System for X and Y Axis
20mm heavy-duty HiWin HG Series linear
bearings and rails on all axes
Controller
Laguna Hand Held
Gantry Clearance
6"
Machine Work Table
47" x 97 "
Z Axis
6"
X and Y Axis
48" x 96"
Machine Foot Print
67.5 " x 120 "
Vacuum table with T-slots
Yes
Heavy
-
duty welded tubular steel
frame
2200 lbs
Solid state limit switches
Yes
Centralized lubrication system
for all axes.
Yes
10HP Regenerative Blower
Yes
Summary of Contents for SMARTSHOP I MANUAL
Page 2: ......
