11
Where to Locate Your Smartshop I
Before you unpack your machine, select the area where you will use your
machine. There are no hard and fast rules for its location but here are a few
guidelines:
1.
There should be an area around the machine suitable for the length of wood
you will be machining.
2.
Adequate lighting: the better the lighting, the more accurately and safely you
will be able to work.
3.
Solid floor: you should select a solid flat floor, preferably concrete or something
similar.
4.
Locate your machine close to the power source and dust collection.
Assembly & Set-Up
Note:
Never use a memory stick with a greater capacity than 8GB. If you do, it will
crash your machine computer. It is strongly suggested that you purchase additional
memory sticks and mark them “Smartshop I machine use only”.
Unpacking Your Smartshop I
To unpack your machine, you will need tin snips, a knife and a wrench.
1.
Using the tin snips, cut the banding that is securing the machine to the
pallet [if fitted].
WARNING: EXTREME CAUTION MUST BE USED AS THE
BANDING WILL SPRING AND COULD CAUSE INJURY.
2.
Remove the box from the Smartshop I [if fitted] and any other packaging
material. The parts ordered with the machine will be packed on or inside the
machine.
Note:
The Smartshop I is heavy. If you have any doubt about the
described procedure, seek professional assistance. Do not attempt any
procedure that you feel is unsafe, or that you do not have the physical capability
of achieving.
3.
Use a fork lift with sufficient lifting capacity and forks that are long enough to
reach the complete width of the machine.
4.
Remove the securing bolts that attach the machine to the pallet [if fitted].
5.
Approaching the machine from the side, lift the machine on the frame taking
care that there are no cables or pipes in the area of the forks.
6.
Move the machine to the required position and lower gently to the floor.
7.
Level the machine so that all the supporting feet are taking the weight of the
machine and no rocking is taking place.
Summary of Contents for SMARTSHOP I 4x8
Page 2: ......
