Laguna Tools MPSP12-5-0135, Manual

Page: 14 / 66

4. Insert the center stud and the T-bolt in the places
indicated (Fig. 23)
5. Secure the crosscut fence with the M8-1.25 knob with
and 8mm flat washer threaded onto the T-bolt.
6. Unlock the crosscut fence extension and slide the flip
stops into the fence (Fig. 24)
7. Slide two M8-1.25 T-nuts into the crosscut fence
extension and attach the crosscut fence support plate
to the fence extension with two M8-1.25 button head
screws and lock washers.
Fig. 23
(11) Sliding Table
Edge shoe x 1
Hold down x 1
1. Slide the M12-1.75 T-nut into the sliding table and
thread in the M12-1.75 x 12 push handle
with a washer. (Fig. 28)
2. Thread the remaining M12-1.75 T-nut into the edge
shoe and slide it into the table. (Fig. 29)
3. Slide the hold down onto the table when needed and
lock it in place.
12
center
stud
placement
T-bolt
1. The accessories bag contains hex
head bolts for fixing the sliding table.
Reset the sliding table complete with
rail on the machine frame. To lock the
rail with the machine frame, screw down
into the threaded hole. Push the sliding
table up against the stop screws prior to
be tighten(fig. 25-1/25-2)
Fig. 25-1
Fig. 25-2