Laguna Tools MPSP12-5-0135, Manual

Page: 11 / 66

4. Attach the small extension table with cap screws,
washer and flat washers (Fig. 7)
5. Check the surfaces 0 degree the table with a
straightedge (Fig. 8)
6. Assemble the support bracket into the extension table
(we have rest holes for fixing), then adjust the leveling
screw of foot studs in order to make left ext. Table
is parallel with saw table.
(7) Scale adjustment
1. Tight the cap screws to the extension table and adjust to be
with the top of the table.
(8) Rip fence
Rip fence content
：
Rip fence x 1
Round rail for rip fence x 1
Rip fence body x 1
Stud m12-1.75 x 115 x 4
Hex Nut M12-1.75 x 12
Flat washer 12mm x 8
Lock washer 12mm x 4
Lock washer 8mm x 1
Cap screw M8-1.25 x 16 x 1
End washer 8mm x 1
Adjustable ring & set screw x 1
Lock handle M10-1.5 x 12 x 2
Knob M10-1.5 x 70 x 1
9
Upper lock
Lower adjust