6
Noise emission
Notes concerning noise emission:
Given that there exists a relationship between noise level and exposure times, it is
not precise enough to determine the need for supplementary precautions. The
factors affecting the true level of exposure to operators are clearly the amount of
time exposed; the characteristics of working environment; other sources of dust and
noise etc. For example, adjacent machines may impact the level of ambient noise. It
is also possible that exposure level limits will vary from country to country.
Specification.
Machine
MJO6405-0800
MJO6012-0800-
3phCSA
MJO6012-0800-
1phCSA
Motor
5 hp / single or 3
phase [5000 rpm]
3 hp / single or 3
phase [5000 rpm]
3 hp / single or 3
phase [5000 rpm]
Fence tilt
90 to 45 degrees
90 to 45 degrees
90 to 45 degrees
Dust chute
diameter
5 inches
5 inches
5 inches
Max cutting depth
0.3 inch [8mm]
0.3 inch [8mm]
0.3 inch [8mm]
Max cutting width
16 inches [400
mm]
12 inches [305
mm]
12 inches [305
mm]
Table [L x W x H]
97.6 inches x
10.28 inches x
4.13 inches
[2480mm x
405mm x
105mm]
79.5 inches x
[2019mm x]
79.5 inches x
[2019mm x]
Cutter head
Insert tooth 4.33
inches dia
[110mm dia]
Insert tooth 4
inches dia
[100mm dia]
Insert tooth 4
inches dia
[100mm dia]
Volts
220Volts single or
3 phase
220Volts single or
3 phase
220Volts single or
3 phase
Weight net/gross
1254 lb / 1386 lb
[570 kg / 630 kg]
968 lb / 1078 lb
[440 kg / 490 kg]
968 lb / 1078 lb
[440 kg / 490 kg]