Laguna Tools MCNC SS2 4X8 6 HP LIQUID COOLED, Manual

Page: 10 / 51

10
Machine Table
The bed of the machine consists of a heavy steel all-welded frame with a
composite work table that is machined for use with a vacuum pump. The table
includes T-slots (and clamps) for special fixturing. The T-slots are used to
clamp the job or fixtures to the bed.
Gantry
The gantry straddles the bed and carries the Electro-Spindle and X and Z
axes motion components. It is moved along the length of the bed by precision
Helical Rack-and-Pinions with drive motors on each end of the gantry.
Electro-Spindle Assembly
The Electro-Spindle is moved along the gantry by a precision Helical Rack-
and-Pinion ball screw system that is controlled by the machine controller.
Frame
The frame is a heavy steel all-welded construction that provides a rigid
platform for the other components and ensures accuracy as well as edge
finish.
Electrical Control Cabinet
A standalone electrical control panel houses all of the major electrical
components, including the machine controller.
Caterpillar Track
The caterpillar track runs along the side of the machine in a special trough
and carries all the electrical cables and air lines.
Vacuum Control Valves
The machine has six (6) vacuum control valves that can be used to direct the
vacuum to the vacuum table zones.
Tool Rack ATC
Tool changer includes eight (8) tool stations to accommodate a large range of
tools. Each of the stations includes a ISO-30 gripper assembly, and station
positions are controlled the Laguna Touch CNC controller.
Additional Instructions for the use of the Laguna SmartShop II CNC
Like all machines, there is danger associated with the machine. Injury can be
caused by lack of knowledge or familiarity. Use this machine with respect. If
normal safety precautions are overlooked or ignored, serious personal injury
may occur. As the CNC is under the control of the onboard machine
controller, it is important that you are clear of the cutter when operating the
machine.