Laguna Tools MBAND18BX2203, Owner'S Manual

Page: 28 / 76

28
Fitting the Fence Stop
The fence stopper can be used to control the length of cut for non
through cuts . To set the stop in place, the scale should be
attached into the T-slot on top of the fence when it is on the
vertical position. The “0” on the scale should be adjusted and set
to be align up to the front tip of the blade. Then refer to the scale,
slide the fence stopper to the desired cutting length behind the
front tip of the blade as shown in the scale, then fix the fence
stopper in place by tightening down the quick release handle.