Laguna Tools MBAND18BX2203, Owner'S Manual, Page: 27 / 76

27
Fence clamped in low position
Fence in low position
Allen key
Fence in high position Support Allen
screw
The fence support and the fence are held off the table with a nylon-support Allen screw. This
screw ensures that the fence and the fence support do not damage the table. The screw is
adjustable to compensate for wear.
Fitting the table insert and Fence Stopper
The machine is supplied with a removable table insert that is held
in position with a screw. The table insert is removed when blades
are removed or fitted to the machine. The insert is made of soft
aluminum so that if the blade wanders and contacts the insert,
there is less chance of damaging the blade. Adjusting screws are
provided to adjust the insert vertically level with the table. The
insert comes factory set, but should adjustment become
necessary, place the insert in the table with the screw fitted.
Place a straight edge across the table and insert and adjust the
screws
Table insert so that the table insert is level with the top of the table.