Part# VDL-18
22
REV#082020
Fence in low position
Fence clamped in low position
1.
Fit the fence bar to the table with the screws and spacers supplied.
Note.
The distance between the fixing holes and the end of the bar is not symmetrical, and
the end that has the longest distance must be at the back of the bandsaw (closest to the
column).
2.
Slide the fence support onto the fence bar and fit the fence support clamp screw.
3.
Slide the fence onto the clamping strip.
4.
Lift the fence just clear of the table and secure it in position with the clamping screws.
Spacer
Fence bar
Fence support
Fence support
Fence support lock knob
Lock knob
Fitting the fence.
Summary of Contents for Dake VDL-18
Page 38: ...Part VDL 18 38 REV 082020 Parts List Upper Wheel Assembly Parts List Below...
Page 42: ...Part VDL 18 42 REV 082020 Table and Fence Assembly Parts List Below...
Page 46: ...Part VDL 18 46 REV 082020 Upper Lower Blade Guides Assembly Parts List Below...
Page 58: ...Part VDL 18 58 REV 082020 VDL 18 Wiring Diagram...
