Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
988050
8
REV032023
•
Always wear approved safety glasses/face shields while using this machine.
•
Make sure that the machine is properly grounded.
•
Before operating the machine remove all ties, rings, watches, other jewelry, and roll up
sleeves above the elbows.
•
Remove all loose clothing and tie up ling hair.
•
DO NOT WEAR GLOVES WHILE OPERATING.
•
Keep the floor around the machine clean and free of scrap metal, oil, and grease.
•
Always keep machine guards in place when the machine is in use. If removed for
maintenance purposes use extreme caution and replace the guards immediately.
•
Do not overreach.
•
Always maintain a balanced stance so that you do not fall or lean against the blades.
•
Dull blades are dangerous.
•
Make all machine adjustments or maintenance with the machine unplugged from the
power source.
•
Use the correct blade. Do not force a blade to do a job which it was not designed for.
•
Do not make cuts requiring more power than is available on the machine.
•
Replace warming labels if they become obscured or removed.
•
Make certain the motor switch is in the OFF position before connecting the machine to
power.
•
Always keep an eye on the work, careless acts can result in serious injury.
•
Make a habit of checking to see that the keys and adjusting wrenches are removed
before turning on the machine.
•
Never place hands directly in line with the saw blade.
•
Always use push sticks when cutting small material.
•
Raise or lower the blade guide only when the machine has been turned off and the blade
has stopped moving.
•
Read and understand the warnings posted on the machine.
•
Failure to comply with all these warmings could lead to serious injury.
SET UP
