Receiving your machine
Before you unpack your new Laguna Tools Lathe, you will need to first
inspect the packing, invoice and shipping documents supplied by the driver.
Ensure that there is no visible damage to the packing or the machine. You
need to do this prior to the
driver leaving
. If any damage is found,
note it
on the delivery documents, which must be signed by you and the delivery
driver. You must then contact the seller [Laguna Tools] as soon as practical.
If you find damage after the driver has left, contact the seller [Laguna Tools]
as soon as practical.
Unpacking your lathe
To unpack your machine you will need tin snips, knife, screw driver [star]
and a wrench
1.
Using the tin snips cut the banding that is securing the box
[if fitted].
WARNING:
EXTREME
CAUTION MUST BE USED BECAUSE THE
BANDING WILL SPRING AND COULD CAUSE
INJURY.
Then remove the
screws that secure the box to the base [row of screws around the
bottom of the box].
2
.
Lift the box off and discard. This needs two people. Or take the box
apart sheet by sheet.
3.
Using the knife, cut the plastic wrap and remove it.
4.
Remove the boxes on the base of the box.
5.
Remove the base mounting bolts that secure the machine to the base.
6.
It is recommended that the machine be removed from the pallet by
lifting it with a hoist or forklift. Place a sling as shown and lift
vertically.
7.
Remove the pallet and lower to the floor.
The machine can be lifted using a forklift truck, by using a “SLING”, as shown
with a lifting capability of 2,000 Kg [4,400lb]
Note: The machine is heavy, so if you have any doubt about the described
procedure, seek professional assistance. Do not attempt any procedure that
you feel is unsafe or that you do not have the physical capability of
achieving.
What you will receive with your machine
Pic of the parts laid out
7
Summary of Contents for CL1200
Page 23: ...23...
