reset automatically. If the motor overheats, wait until it has cooled and restart. If
the motor shuts down consistently, check for the reason. Typical reasons are dull
cutting tools, motor-cooling fan clogged or faulty, motor-cooling fins clogged, over-
feeding the job and excessive ambient temperature.
Squeaking noise
1
.
Check that the motor-cooling fan is not contacting the fan cover.
2
.
Check the bearings.
3
.
Check the drive belt.
Spindle slows down during a cut
1
.
Loose drive belt. Re-tension the belt.
2
.
Dull cutting tools. Replace the tool or have it re-sharpened.
3
.
Feeding the wood too fast. Slow down the feed rate.
4
.
Oil or dirt on the drive belt. Clean or replace the drive belt.
Machine vibrates
1
.
Machine not level on the floor. Re-level the machine, ensuring that it has no
movement.
2
.
Damaged drive belt. Replace the belt.
3.
Job is not balanced. Change to slower speed and or balance the job.
4
.
Damaged pulley. Replace the pulley.
Electrical drawing
22
Summary of Contents for CL1200
Page 23: ...23...
