7
Unpacking your machine.
1.
Dismantle the box and lift the box off the pallet [If fitted].
2.
Using the knife, cut the plastic wrap [if fitted].
3.
Remove all the parts that have been packed with the machine.
Note.
If you have any doubt about the described procedure, seek professional
assistance. Do not attempt any procedure, that you feel is unsafe, or that you do
not have the physical capability of achieving.
Where to locating your Air filter.
There are no hard and fast rules for its location, but below are a few guidelines:
It must have un-obstructed air flow both the front and back of the air filters.
It should be located in a conveionent position to conduct regular maintenance.
You will have to clean the filters regularly.
It should be suspended above head height. You don’t want to hit your head.
It should be located in a central position to allow optimum air movement around
your shop.
Filtration system preparation
Unpack your air filter and assemble
the lock nuts to the eyebolts, and
insert the 4 eye bolts into the
threaded holes at the corners of the
air filter.
Using a 10mm wrench tighten the lock
nut against the cabinet.
Eye bolt lock nut Eye bolt
Eye bolt in each corner
Suspend the air filter from a suitably strong overhead support. [Roof joist or
something similar]. Ensure that the suspension method is strong enough to
support the unit.
Summary of Contents for Circulator 1400
Page 1: ...MDCCIRC1400 0145...
Page 2: ......
