Laguna Tools Circulator 1400, Manual, Page: 6 / 11

6
Noise emission
Notes concerning noise emission
Given that there exists a relationship between noise level and exposure times, it
is not precise enough to determine the need for supplementary precautions. The
factors affecting the true level of exposure to operators are clearly the amount of
time exposed, the characteristics of working environment other sources of dust
and noise etc. For example, adjacent machines, in other words the level of
ambient noise. It is possible that exposure level limits will vary from country to
country.
Receiving your machine.
Note.
It is probable that a third party will deliver your machine.
Before you unpack your machine you will need to first inspect the packing,
invoice and shipping documents supplied by the driver. Insure that there is no
visible damage to the packing or the machine. You need to do this prior to the
driver leaving. All damage must be noted on the delivery documents and signed
by you and the delivery driver. You must then contact the seller [Laguna Tools]
as soon as practical. If damage if found after delivery, contact the seller as soon
as practical.
Parts of the machine.
The Air filter consists of a fan the sucks air
through two filter systems [Outer and inner
filters].
There is a control panel that has thr
ee LED’S to
indicate if the filters are becoming blocked. Once
all three LED’S are lit the filters must be cleaned.
There is a 3 amp protection fuse.
There is a on / off / remote control switch.
There is a power cable.
Note there may not be a plug fitted to the power
lead, as the type of plug you need to suite your
electrical system may vary.
Specification
Filtration Inn-Bag Filter: 1 micron
Outer Pre-Filter: 5 micron
Dimensions Wide 510mm
[20”]X Long 775mm
[30 ½”] X high 420mm [16 ½”]
Motor 110V 1 Phase 1/3HP
Weight N.W.: 33 KGS G.W.: 34 KGS
CUFT: 8.2'
Wire supplied 1.9 mt [6 ft]
Filter LED’S Power cable
/
On / off/ remote
control switch Fuse