Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
Part# 972016-2
7
REV#082020
Specifications
Product Features:
-
Double acting cylinder, utilizes the pulling force to raise and lower the table via chains,
eliminating the need for hoist assemblies.
-
Fast, quiet, dependable, economical price, smooth operating press that is very simple to
operate.
-
Heavy adjustable table can be set to a comfortable work height. Massive table pins keep table
securely in place during the pressing operations.
-
Pressure preset and locked out at factory for maximum pressing, Pressure can be increased or
decreased to suit user’s needs but can never be set to exceed max tonnage.
-
The motor is a powerful 4 HP submerged type that runs 3 centrifugal pumps for steady quiet oil
flow.
-
CE approved controls located in convenient locations are all low voltage, with overload
protection and low-tension coils. Joystick operation for easy machine operation.
-
Rapid advance of the ram to the work piece, when contact is made the machine shifts into the
pressing mode.
-
Remove standard nosepiece and install your own custom fixturing.
-
Five-piece Dowdy Polypak piston seals
Machine Specifications:
150 Force 3 Phase Press
Item
Specification
Machine Type
H – Frame Hydraulic Powered
Capacity
150 – Tons
Maximum Operating Pressure
360 Bar
Minimum Operating Pressure
15 Bar
Ram Diameter
140mm (5.512 Inches)
Bore Diameter
230mm (9.055 Inches)
Ram Travel
19 Inches
Ram Rapid Advance Speed
49 ipm
Ram Pressing Speed
7 ipm
Horsepower (HP)
4 HP
Hydraulic Pump
3 Centrifugal Pumps
Controls
Panel Mounted 24-Volt CE Approved with Joystick Operation
Filter Type
Cartridge / External Access
Weight
5,711 lbs
Overall Height
106 Inches
Base
98 x 47 Inches