Lagler Trio, Operation Maintenance Safety, Page: 11 / 52

11
4.1 GENERAL INFORMATION AND TIPS
You may use your TRIO for many a wide range of dry floor treat-
ment.
For the first sanding of newly laid parquet it is advisable to use the
HUMMEL with sanding agents of up to 60 or 80 grain, whatever the
job demands. The choice of sanding agent depends on the kind of
wood involved, initial run, type of sealing and the required surface
finish. Always only use half-decked diffuse sanding papers.
With the TRIO, you should always begin with 60 grain sanding
discs. In the case of a poor first run, the amount sanded off can
be increased by sanding without the flexible Velcro rings. As with
belt sanding, the first run has to eliminate all the signs of previous
sanding jobs!
Mesh discs must be used for intermediate varnish sanding. The
choice of grain depends on the varnish used, the varnishing speed
and the required finish.
For cork floors, use 60 grain discs for your first run and 80 grain discs
for the second. Intermediate varnish sanding and sanding of cork
and rubber floors should be done without the additional weight.
Suction the dust from the floor thoroughly after each sanding proc-
ess. Keep the running wheels of the machine clean.
Further important and interesting information about sanding wooden
floors can be found in the LÄGLER application techniques brochure
„Sanding wooden floors“!
WORKING WITH THE TRIO
Working with the TRIO
4
Further information can be obtained free of
charge: within Germany
- Phone: 0800 / 52 34 537
- Fax: 0800 / 48 66 353
within USA
- Phone: 800-848-6635
or
- Phone: +49 - 7135 - 98 90-0
- Fax: +49 - 7135 - 98 90-98
- e-mail: info@laegler.com
- Internet: http://www.laegler.com
The machine must never be used for wet sanding jobs of any
kind!