Induction line from the ceramic
Induction line from the seat
Outlet water hose
Power line
As figure 1
As figure 1
10. Connect outlet hose, power line and induction
line from the ceramic to each part of the seat.
Attach outlet water hose and power line to
toilet as the arrow shows in figure 1.
Note: Users need to open the waterproof
connector to check if correctly connect to
the power line.
11. Put the toilet seats set on the top of ceramic body
and then open the upper cover, fastened by fixing
screws and then put the decorative caps.
12. When the installation is completed,
the remote controller is installed in
an appropriate position.
592
Product installation
Screw
Decoration cap
Fixed hole
420
1600
-11-