7 Options
7.1 Light
Source
(optional)
The 7000smz and 5000mz instruments may be (optionally) supplied with an LED
cold light source. The light source should be fixed to either the top of the covers of
the instrument or (if you have the optional magnifier) to the mounting bracket for the
magnifier. If the light source is fitted directly to the instrument cover, place the
neoprene cushioning pad between the cover and the light source body before fitting
and tightening the fixing screws. Do not over-tighten the screws. This is illustrated
below.
The light source can be switched on and the light intensity controlled via a combined
rotary switch/potentiometer on the body of the light source where the flexible arms
are mounted.
The output beams may be focussed by rotating the lens ferrule at the end of each
flexible arm.
The power supply is supplied with a number of adapters and should be fitted with the
appropriate adapter to suit the available power outlet.
CAUTION – UV LED Class 3B LED product
The device contains UV light LEDs. The LED during operation radiates intense UV
light. Do not look directly at the UV light with unprotected eyes. If there is the
possibility of looking at reflections of the light you should use suitable UV light
protective glasses.
On/Off and
intensity
control
Beam focus
control
