Lafayette Range of Motion Inclinometer
3700 Sagamore Pkwy N Lafayette, IN 47904 USA
Resets
To restore to factory defaults, press MENU/SELECT and navigate to the Information screen. Press and
hold MENU/SELECT then press the left base button consecutively until screen reads “Factory reset will
delete all tests and all settings”. Follow the prompts on screen until the screen reads “Factory reset
complete!”.
Hard Reset: If the inclinometer freezes press down arrow and the up arrow until the unit powers off
and back on.
Firmware Updates
Lafayette Instrument periodically updates the firmware for select products. Visit our website to
download our Firmware Updater software. The ROMI can be updated by plugging in the USB charger
into your computer and downloading the current version of the firmware via the Firmware Updater.
Inclinometer Cleaning
Hard surfaces can be cleaned with a bleach-free sanitizing wipe. Alcohol wipes may also be used.
Cloth or foam surfaces can be cleaned with anti-bacterial soap and water and allowed to air dry. Care
must be taken to not allow water to penetrate the enclosure as damage to the circuit may occur.
Disclaimer: These cleaning instructions for Lafayette Instrument products are a recommendation of compatible
cleaning materials only. Product end users are responsible for instituting an appropriate cleaning regimen utilizing
best practices and techniques. Lafayette Instrument assumes no responsibility for the cleanliness or sanitation of the
products after initial use nor makes any claim that the use of the recommended cleaning materials mitigates all risk
of potential cross infection.
10
