Fax: 765-423-4111 . www.lafayetteinstrument.com . E-mail: [email protected]
Model 89000B Assembly and Users’ Instructions
5
(D)
Power Control Box
*See diagram on page 10
Required tools: none
1.
First, mount the power control box using the two knurl screws at the base of the column.
2.
Next, connect the cables to the back of the control box where it its labeled 1 through 8.
3.
Connect the IEC cable to the power box, and plug the other side to the 120v outlet.
(E)
Switch box
Required tools:
None
1. Use the DB-25 cable and attach one side to the switch.
2. Attach the second side of the DB-25 cable to the power box.
3. If you are using a tripod, use the screw mount on the bottom of the switch box.
back of power control box
front of power control box