VitalsBridge Directions for Use
16
rev. A.5
Electrocardiogram (ECG) and Respiration (VB300, VB200)
The VitalsBridge has connections for up to 5 ECG leads (RA, RL, V, LL, and LA). In addition, a respiration by impedance
signal is also produced by the VitalsBridge.
Configuring ECG
1.
Using the ECG harness from the patient monitor, connect each lead to the VitalsBridge. Match the
corresponding colors or labels on the leads to the snaps on the VitalsBridge.
2.
Once connected and with the VitalsBridge powered on and initialized, a reading should appear on the patient
monitor after a few moments.
Summary of Contents for VitalsBridge 100
Page 1: ......
