LAC-UOM-001, Rev.1.1
2
2.
INSTALLATION INSTRUCTIONS
2.1 Supplies
The only tool required to install SIMETRI’s Amputations with Cores is the Laerdal Arm Allen Key
(8 mm) provided with the Laerdal SimMan 3G manikin (
Figure 2
).
Figure 2. Laerdal Arm Allen Key Provided with Laerdal SimMan 3G Manikin
2.2
Environment
Although installation can be done in any environment, a dry and climate-controlled environment is
ideal for installing the Amputation with Cores on the Laerdal SimMan 3G manikin. If not in the ideal
environment, be cautious to avoid getting any fluids or heavy moisture within the system.
2.3
Procedure
In order to install the Amputations with Cores, remove the existing limb from the manikin, following
the removal instructions for the existing limb. If replacing a leg, first unzip the chest skin and lay
the skin open to one side so the ribs are exposed (
Figure 3
).
Figure 3. Unzip Chest Skin
