LAC-UOM-001, Rev.1.1
9
the manikin.
For the Arm Amputation, make sure the Laerdal manikin’s system is turned off and perform the
following steps.
1.
Unzip the chest skin (
Figure 3
) and lift up the chest plate. Disconnect the red line from
the manikin and the Arm Amputation by twisting the white connector.
2.
Remove hair cotter pin from arm connector and pull amputation away from manikin
(
Figure 14
). Remove arm amputation from manikin.
Figure 14. Arm Disconnection
3.
Reinsert the arm connector of the limb to reconnect the arm. Secure with the bolt you
secured when installing the arm amputation, using the Laerdal Allen Key (
Figure 2
).
Allen bolt
Hair cotter pin
