Overview of LED/Laser Classifications according to EN 60825-1 and IEC 60825-1
The IEC (International Electrotechnical Commission) has devised an international standard (IEC-
60825 -1) for the classification, requirements and use of lasers.
Class 3R
This class is not regarded as dangerous (low risk). The limit for class 3R is 5 mW.
The Laeq Health has a power capacity of 5 mW and belongs to the class 3R lasers. To guarantee a
power capacity of 5 mW, a power control unit has been built-in that prevents the device from
ever crossing that 5 mW boundary.
A specific diverging lens is also installed in our laser clip, equally spreading the monochrome
laser beam.
The optimal amount of energy that is absorbed by the mitochondria is 2 to 4 Joules per cm
2
. This
can be calculated with the formula J/cm
2
= W x T, which is published in numerous scientific
studies. If the intensity is higher than the 2 to 4 Joules per cm
2
mark, the laser treatment could
have a negative effect.
To guarantee an optimal amount of energy, our laser is controlled with an app that is
programmed to never cross that 4 Joules per cm
2
boundary. The laser cannot be activated when
the maximum amount of time per day has been reached.
The placement of the clip in the nose and the corresponding maximum treatment time has been
empirically set. During a period of 30 minutes, every cell in the blood will be radiated 12 times.
The use of the Laeq Health is always safe because:
•
The 5 mW boundary cannot be crossed – power control
•
Overdosing is impossible – Laeq Health App
•
It cannot cause addictions – Laeq Health App
•
Misuse is impossible – Laeq Health App
10
Environment and preventing unauthorized use
Laeq Health strives to dispose of the used components in a 100% environmentally-friendly
manner. We also want to prevent incorrect use of the components. We therefore ask you kindly
to return any components that have been used after the 6 month period is over. You can use the
included return envelope for this purpose, at no additional costs.
11
Troubleshooting
Problem
Possible cause
Solution
The Laeq connector does not
turn on
The Laeq connector battery is
empty
Fully charge the battery