background image

First Use Preparation or Not in Use for a Long Period

3

Before you use it for the very first time, clean the coffee maker twice 
based on the guidelines below.
1. Pour water into the water tank and do not exceed the "Max" mark in 
the tank.
2. Put the filter into the funnel, tighten and align it with the "        " mark 
(see below pictures). 

3. Plug in the power, press the "         " button, the coffee maker beeps.  
"       " and "         " button lights flashing together indicates the coffee 
maker starts to warm up      (Make sure that the steam knob points to  
"         ". If it points to "        ", the four lights will flash together and the 
machine will not work.).
4. Turn the steam knob to “        ” for the steam nozzle to discharge hot 
water.Then turn the steam knob back to“            ” 
5. When the indicator lights of "        " and "          " are always on, press 
the button of "        " to wash the coffee filter or coffee cup with hot 
water.

Espresso Coffee Making

1. Insert filter to the funnel, load ground coffee powder into the filter 
and compress it with the rear of the coffee spoon; meanwhile, clean 
the coffee powder at the edge of the funnel. 

Summary of Contents for CMEP02

















Reviews: