background image

8

5. After five minutes, press the "

          

" button and repeat the Step 4 for 

3 times.
6. Fill the water tank with water(No need to put in descaler). Press the 
"

          

" button and repeat the Step 4 for 3 times.

7. To cancel the descaling reminder after cleaning, please press “ 

            

” 

               

 ” and “

             

 ”at the same time for 3 seconds to cancel the flash-

ing light.

1. All 4 buttons 

Flash 5 times and 

the coffee maker 

beeps for 5 times.

4 . Press the  "

            

" button and hot 

water flows into the drip tray.

7 . Fill the water 

tank with water

(No need to put 

in descaler).

8 . Press the "

          

" button and repeat 

the Step 4 for 3 times.

9 . Press the "

        

" button. Press “

         

” 

           

” and “

          

” button at the same 

time for 3 seconds to cancel the flashing light.

5 . Press the "

       

button to shut 

down and leave 

the descaling 

solution in the 

water pipe for 5 

minutes.

6 . After five 

minutes,press the

"

        

" button to 

start the machine 

and repeat the 

Step 3 and the 

Step 4 for 3 times.

2 . Fill the water 

tank with water 

and descaler 

to the MAX level.

3 . Press the "

         

button to start to 

heat the water.

Summary of Contents for CMEP02

















Reviews: