3
ENGLISH
Always disconnect AC main before connecting / disconnecting batteries. Connect the
charger according to the diagram.Then connect AC main and check that the indications
are normal.
• Yellow: Charging in process
• Yellow/green alt.: Charging paused
• Green: Fully charged batteries, stand-by voltage
• Red/Green alt.: Temperature protection
• Red: Charger not connected, wrong polarity or short circuited
Maintenance:
All batteries should be checked monthly for maximum security. The charging cyclus
keeps the batteries fully charged with a very low water consumption.
The charger does not draw any current from the battery if the mains are disconnected.
Multi-channels may be connected to the batteries regardless of inter-connections between
the batteries.
Multi-channels may be connected in parallell to one battery.
The charger should be placed as close to the battery as possible.
If used over greater distances use a circuit breaker near the batteries.
WARNING!!
Do not mount the charger near any combustible area.
GASSING
Explosive oxyhydrogen gas may be formed in the charging process. It ignites very easily
– a small spark is enough. Never smoke or use bare flames etc. close to the batteries.
ACID
Battery electrolyte is acidous and corrosive. It attacks human skin, fabrics, metal and
paint. If electrolyte is spilled, itshould immediately be washed off with plenty of water. If
it gets into the eyes, immediately rinse with water and contact a doctor.
POISON
Lead and some chemical agents used in batteries are very poisonous. Wash hands and
skin thorougly after working with batteries.
